Checking hours… Round rock (737) 230-7099
Over and Above Contracting
Metal Roof Installation Built for Central Texas Heat and Storms
Family-owned · Round rock Local

Metal Roof Installation Built for Central Texas Heat and Storms

Standing-seam, metal-over-shingle, and full metal roof installs across Salado, Round Rock, Temple, and Austin. One owner on every job, and a straight read on whether metal is the right call for your home.

Call directly(737) 230-7099
FreeEst.
Free Estimate

Tell us what you need.

Takes about a minute. We'll follow up within one business day. No pressure, no upsells.

No obligation · Responds within 1 business day

Round rock · Trusted Locally

Why Choose Over and Above Contracting for Metal Roof Installation Built for Central Texas Heat and Storms

Over and Above Contracting installs metal roofs across Salado, Round Rock, Temple, and the greater Austin area, and the cost of a metal roof installation depends on the metal system you choose, the pitch and complexity of your roof, and what the crew finds under the old covering once they're up there. It's a bigger decision than a shingle swap, especially if you're tired of replacing shingles every time a Central Texas hailstorm rolls through. Over and Above handles the whole job under one roof: Mike Ennis walks the property, gives you a straight read on whether standing-seam, metal-over-shingle, or a full tear-off makes sense, and you get one point of contact from the first site visit through the final walk. If you're weighing metal for a home in Salado, Round Rock, Temple, or the greater Austin area, call (737) 230-7099 and talk to Mike directly.

Here's the part most roofers won't say out loud: metal isn't automatically the right answer for every house. On the exposed ridgelines west of I-35 near Salado, where wind-driven hail comes in at an angle, a properly-fastened standing-seam system earns its price by shrugging off impacts that would total an asphalt roof. But on a low-slope addition or a house you plan to sell in three years, the math can favor an impact-resistant shingle instead. Metal roof installation costs run meaningfully higher than shingle up front, and the payback comes from longevity and reduced cooling load over decades, not next year. Mike will tell you when metal pencils out and when it doesn't. Every job is different. Contact Over and Above Contracting for an accurate estimate.

metal roof installation on a two-story residential home in Central Texas

Metal Roof Installation: What the Job Actually Involves

A metal roof installation on a typical Central Texas home takes two to four days for a straightforward pitch, longer for complex rooflines with multiple valleys, dormers, or a steep grade. The sequence matters more than most homeowners realize.

The order of operations is what separates a roof that lasts 40-plus years from one that leaks at the seams inside a decade:

1. Assessment and measurement. Mike gets on the roof, checks the decking condition, measures the planes, and identifies every penetration (vents, chimneys, skylights) that will need custom flashing. This is where he tells you whether metal-over-shingle is viable or whether a tear-off is the honest call. 2. Deck prep and underlayment. For a full install, the old covering comes off and the decking gets inspected and repaired where soft. A high-temperature synthetic underlayment goes down before any panel. In Central Texas attic heat, a standard felt underlayment cooks and fails early, so the underlayment spec is not a place to cut corners. 3. Panel or shingle installation. Standing-seam panels are run from ridge to eave and mechanically seamed or snap-locked so no fastener penetrates the weather surface. Metal shingles and tiles are installed in courses with concealed clips. 4. Ridge cap, flashing, and trim. The ridge cap metal roof detail is where wind-driven rain either stays out or works its way in. Eave, rake, valley, and penetration flashing all get sealed and fastened to spec. 5. Final walk and cleanup. Magnetic sweep for stray fasteners, gutter check, and a walkthrough with you before the crew leaves.

Ready for a straight assessment? Call (737) 230-7099 and Mike will walk your roof before quoting.

metal roof installation in progress with high-temperature underlayment on a Round Rock home

Standing Seam Metal Roof Installation and Cost

Standing-seam is the metal system most people picture, and it's the one that performs best against Central Texas hail and wind. Standing seam metal roof installation costs more than metal shingles or an exposed-fastener panel, and here's exactly what drives the number:

Panel Gauge and Metal Type

Heavier-gauge steel and standing-seam profiles cost more than thin exposed-fastener panels. On hail-prone ridgelines near Salado, the heavier gauge is worth it. On a protected lot, a lighter spec can be the smarter spend.

Roof Complexity

Every valley, dormer, chimney, and skylight adds custom flashing and cut time. A simple gable roof installs fast. A cut-up roof with multiple planes takes longer and costs more per square.

Tear-Off vs. Overlay

A full tear-off to the deck costs more than installing over an existing layer, but it lets the crew inspect and repair the decking. On older homes, that inspection is where hidden rot gets caught before it becomes a structural problem.

Underlayment and Ventilation

High-temperature underlayment and proper ridge ventilation aren't optional in this climate. They add to the estimate and they're the difference between a roof that lasts decades and one that fails early from trapped attic heat.
metal roof installation on a two-story residential home in Central Texas

Metal Roof Over Shingles: When It Works and When It Doesn't

Metal roof over shingles installation is legitimate and it can save real money on labor and disposal, but it is not a shortcut for every house. A metal-over-shingle install works when the existing shingle layer is a single course, the decking underneath is sound, and local code allows the overlay. It skips the tear-off, which cuts labor and dump fees, and it can be a smart way to get a metal roof on a home that already has a serviceable deck.

It does not work, and Mike will say so on-site, when any of these are true:

- The roof already carries two or more layers of covering (weight and code both become problems) - The decking is soft, delaminated, or shows past water intrusion (you'd be trapping the problem under new metal) - The existing shingles are badly cupped or uneven, which telegraphs through the new panels and creates fastening headaches

"An overlay that saves you money today but seals a rotting deck underneath costs you the whole roof in five years. If the deck is bad, we tear off. That's not upselling, that's the honest call."

The overlay decision comes down to what's actually under your shingles, and you can't know that from the ground. That's the first thing Mike checks on the site walk.

Ridge Cap, Flashing, and the Details That Keep the Roof Dry

Ridge Cap, Flashing, and the Details That Keep the Roof Dry

The panels get the attention, but the ridge cap and flashing are where metal roofs actually succeed or fail. Ridge cap metal roof detailing seals the peak where two roof planes meet, and it has to breathe (to vent attic heat) while keeping wind-driven rain out. Get the ridge vent wrong and you either trap heat that cooks the underlayment or leave a gap that leaks in a hard blow. Flashing is the other quiet killer. Every chimney, vent stack, valley, and wall transition needs metal formed and sealed to fit that exact penetration. On the older housing stock around Temple and central Salado, chimney flashing is the single most common leak point Mike finds, usually because a previous crew relied on sealant instead of properly-formed step flashing. Sealant is a five-year fix. Formed flashing is a decades fix. Over and Above does the formed flashing every time.
metal roof installation on a two-story residential home in Central Texas

When a Metal Roof Is the Wrong Call

Not every home should get a metal roof, and you deserve to hear that before you spend the money.

Hold off on metal, or at least get a second opinion, if any of these describe your situation:

- Your current roof is under 8 years old with no storm damage. You're not near the end of its service life. Reroofing now means paying for life you haven't used yet. Get it inspected, but don't let anyone rush you. - You're selling within a few years. Metal's payback comes from decades of longevity and lower cooling bills. If you won't own the home long enough to capture that, an impact-resistant shingle usually returns more at resale for less up front. - Your only motivation is a storm-chaser's insurance pitch. After a big Central Texas hail event, out-of-town crews flood in pushing full replacements. If your roof took cosmetic dents but is still shedding water, a repair or a documented claim may serve you better than a rushed full metal install. Get an independent inspection first.

Mike would rather lose the job than sell you a roof you don't need. If metal isn't right for your home yet, he'll tell you, and he'll tell you what to do instead.

metal roof installation in progress with high-temperature underlayment on a Round Rock home

Why Central Texas Homeowners Choose Metal

When metal is the right call, here's what it buys you in this specific climate:

Hail and Wind Resistance

A properly-fastened metal system handles the wind-driven hail that regularly tests roofs from Round Rock up through Salado and Temple. Many metal profiles carry the highest impact ratings available.

Real Cooling Savings

Reflective metal and proper ventilation cut peak attic temperatures, which eases the load on your AC through a long Central Texas summer. The savings compound every year you own the home.

40-Plus Year Service Life

A metal roof installed correctly outlasts two or three shingle roofs. Over decades, the longevity is where the higher up-front cost pays you back.

Fire Resistance

Metal doesn't ignite from wind-blown embers, which matters during dry Central Texas summers when grass and brush fires flare up.

Low Maintenance

No granules to lose, no shingles to blow off. An annual flashing and fastener check is most of what a metal roof asks of you.

One Owner Accountable

Mike Ennis runs every Over and Above job personally. No field supervisor you never met, no subcontracting surprises. When we take the job, we're the ones on your roof.

Get a Straight Answer on Metal Roofing for Your Home

Whether you're set on standing-seam or just trying to figure out if metal makes sense for your house, Mike will walk your roof and give you a straight read. No sales pitch, no pressure, no obligation. Call (737) 230-7099 or send the details through the contact page and we'll come back with an honest assessment.

Call (737) 230-7099 Get a Free Estimate
metal roof installation in progress with high-temperature underlayment on a Round Rock home
FAQ Common questions

Frequently Asked Questions

Answers below
How much does metal roof installation cost? +
Metal roof installation cost varies widely because the price depends on the metal system, the size and complexity of your roof, and whether the job is a full tear-off or an overlay. Standing-seam runs higher than metal shingles or exposed-fastener panels, and a cut-up roof with multiple valleys and penetrations costs more per square than a simple gable. Up front, metal costs meaningfully more than asphalt shingle, and the payback comes from longevity and reduced cooling load over decades. Every job is different. Contact Over and Above Contracting at (737) 230-7099 for an accurate estimate after a site visit.
What is the price difference between standing seam and a shingle roof? +
Standing seam metal roof installation costs noticeably more up front than an asphalt shingle roof of the same size, driven by heavier material, custom flashing, and more labor-intensive panel work. The trade-off is service life: a standing-seam roof can last 40-plus years and shrug off the wind-driven hail common across Central Texas, while a shingle roof in this climate often needs replacing every 15 to 20 years, sometimes sooner after storm damage. Over the life of the home, metal frequently comes out ahead. The right choice depends on how long you'll own the house. Call (737) 230-7099 and Mike will help you run the actual numbers for your situation.
Can you install a metal roof over existing shingles? +
Yes, metal roof over shingles installation is legitimate and can save on labor and disposal, but only when the conditions are right. It works when there's a single existing layer, the decking underneath is sound, and local code allows the overlay. It does not work if the roof already carries two or more layers, the decking is soft or water-damaged, or the shingles are badly cupped and uneven. The only way to know is to inspect what's under your shingles, which is the first thing Mike checks on the site walk. If the deck is compromised, a full tear-off is the honest call.
What roofing materials best withstand Central Texas heat? +
For Central Texas heat, the best-performing roofs combine a reflective, durable covering with proper attic ventilation. Metal roofing performs strongly because reflective panels shed radiant heat and, paired with adequate ridge ventilation, cut peak attic temperatures that routinely top 130 degrees on a dark shingle roof in summer. Impact-resistant asphalt shingles and clay tile also hold up well when installed with a high-temperature underlayment rated for the attic heat this region generates. The covering matters, but underlayment spec and ventilation are what make any material last in this climate. Mike assesses all three on every job.
How long does a metal roof installation take? +
A metal roof installation on a typical Central Texas home takes two to four days for a straightforward pitch. Complex rooflines with multiple valleys, dormers, or a steep grade take longer. A metal-over-shingle overlay goes faster than a full tear-off because it skips the removal and disposal step. The timeline also depends on weather, since panels and underlayment need dry conditions to install correctly. Mike gives you a realistic schedule after the site walk, and Over and Above stays on the job until it passes the final walkthrough rather than jumping to the next roof.
Do you install metal roofs in Salado, Round Rock, and Temple? +
Yes. Over and Above Contracting handles metal roofing installation across Central Texas, including Salado, Round Rock, Temple, and the greater Austin area. Mike Ennis has worked roofs throughout the region and knows the local conditions that matter: the wind-driven hail that comes off the ridgelines near Salado, the older housing stock around Temple where chimney flashing is a common leak point, and the summer attic heat that makes underlayment spec and ventilation non-negotiable. Call (737) 230-7099 to schedule a site visit for your home.

Related

Explore

You Might Also Need

See all services
Local

Areas We Serve

See the full service area
Guides

From the Blog

Read the blog